* slike so simbolične
Zaporni ventili manometrov, pipa - vpenjalni tulec, G 1/2
SKU: 102660RIE
EAN: 4047322122986
Block valve pressure gauge, Taps-tension sleeve, 1.4571 housing, 1.4305 t. sleeve, G1/2, PN 25bar, max. 50°C, Test flange 60x25x10
It is useful to install a stopcock as a shut-off element between the pressure gauge and the pipe.
When the lever is set to the »blow out« position, the medium is discharged into the atmosphere.
Stopcocks with a test port allow pressure gauges to be simultaneously connected to the pipe.
Obrestno financiranje
- 18,06 € x 12 mesecev
- 35,33 € x 6 mesecev
- 69,88 € x 3 mesecev
Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay. Informativni izračun ne vključuje stroškov ocene tveganja.
| Šifra | Konektor z notranjim/zunanjim navojem | Navoj | Ohišje | Različica | PN [bar] | a/f [mm] | Testna prirobnica | Standard | Zaloga | Cena | Nakup | Natisni |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 102659RIE | Phosphatised steel | G 1/2 | Brass with a bare metal surface | male / female/female, with test flange 60x25x10 | 25 | 27 | 60x25x10 | Čas dobave 3 - 5 dni | 43,63 € |  | ||
| 102658RIE | Stainless steel 1.4305 | G 1/2 | Stainless steel 1.4571 | male / female/female | 25 | 27 | DIN 16262-A | Čas dobave 3 - 5 dni | 134,15 € | | ||
| 102657RIE | Phosphatised steel | G 1/2 | Brass with a bare metal surface | male / female/female | 25 | 27 | DIN 16262-A | Čas dobave 3 - 5 dni | 29,22 € | | ||
| 102660RIE | Stainless steel 1.4305 | G 1/2 | Stainless steel 1.4571 | male / female/female, with test flange 60x25x10 | 25 | 27 | 60x25x10 | Čas dobave 3 - 5 dni | 193,05 € | | ||
| 102661RIE | Phosphatised steel | G 1/2 | Brass with a bare metal surface | male / female/female, with test flange 40x5 | 25 | 27 | 40x5 | Čas dobave 3 - 5 dni | 47,93 € | | ||
| 102656RIE | Phosphatised steel | G 1/4 | Brass with a bare metal surface | male / female/female | 6 | 17 | DIN 16262-B | Čas dobave 3 - 5 dni | 23,88 € | |
Opis
Block valve pressure gauge, Taps-tension sleeve, 1.4571 housing, 1.4305 t. sleeve, G1/2, PN 25bar, max. 50°C, Test flange 60x25x10
It is useful to install a stopcock as a shut-off element between the pressure gauge and the pipe.
When the lever is set to the »blow out« position, the medium is discharged into the atmosphere.
Stopcocks with a test port allow pressure gauges to be simultaneously connected to the pipe.
Tehnični podatki in specifikacije
| Navoj | G 1/2 |
| PN [bar] | 25 |
| a/f [mm] | 27 |
| Max. temperaturno območje [°C] | 50 |
| Ročica | Plastic |
| Ohišje | Stainless steel 1.4571 |
| Testna prirobnica | 60x25x10 |
| Različica | male / female/female, with test flange 60x25x10 |
| Konektor z notranjim/zunanjim navojem | Stainless steel 1.4305 |
| Aplikacije | For all pressure gauges with a flat gasket acc. to DIN 16258 |
